skip to main content

What Is a Good Internet Speed for Gaming?

Here’s the short answer: You don’t need a lot of speed to play games online. In fact, all you need is a 5Mbps connection or faster. That’s it. Case closed.

But don’t leave us just yet. Speed shouldn’t be your only concern. There’s much more to a good online gaming experience than signing up for the fastest internet plan on the planet. You need a connection with low latency, too, as no amount of speed will eliminate laggy gameplay if your latency ranges into hundreds of milliseconds.

We’ve boiled down the most important points of a good internet speed for gaming online so you know exactly what kind of connection you need to get the most out of your online gameplay.

Looking for the best internet provider for gaming?

Verizon Fios has the lowest latency in our tests. Enter your zip code to see if Verizon or one of our other picks for the best internet providers for gaming is available in your area.

Our recommended connections for gaming online

Fiber internet from providers like AT&T , Google Fiber, and Verizon Home Internet is the best connection for playing games online. It has symmetrical speeds—great for livestreaming—and super-low latency.

Cable internet from Spectrum, Xfinity, and similar providers comes in at a close second. Go with cable before any other internet connection if fiber isn’t available to you.

DSL internet is your next best option if you can’t get fiber or cable. It uses telephone lines and generally introduces more latency, but is better for gaming than wireless connections.

Don’t have access to wired internet? 5G Home Internet is your next best option. It’s a new fixed wireless service boasting lower latency than any other wireless connection. The fastest plan you can get right now is 1,000Mbps, although the technology is capable of higher speeds.

Your carrier’s 5G mobile service would be your backup connection if 5G Home Internet isn’t available to you. The top speed is also 1,000Mbps, but your average real-world speed may be around 200Mbps if you’re lucky.

Finally, 4G and 4G LTE connections (mobile and fixed wireless) generally have much more lag than wired connections but are capable of reaching our recommended latency of below 100 ms.

Connection typeMax download speedsLatency*Providers
Fiber10,000Mbps (10Gbps)11–14 msGoogle Fiber, Verizon , AT&T , Frontier , CenturyLink
Cable2,000Mbps (2Gbps)15–35 msXfinity , Cox , Spectrum , Optimum
DSL140Mbps25–43 msCenturyLink , Verizon , AT&T , Windstream
5G (mobile)1,000Mbps (1Gbps)-Verizon , AT&T , T-Mobile Home Internet
4G LTE (mobile)300Mbps-Verizon , T-Mobile Home Internet
Fixed Wireless1,000Mbps (1Gbps)-Rise , Verizon , AT&T
Satellite200Mbps594–624 msViasat , Hughesnet

Is your connection fast enough to play games online?

Run our internet speed test or download our free speed test app to test your speed from anywhere.

Download our free, easy-to-use speed test app for quick and reliable results.

What is Latency in Gaming

Latency can be downright evil. Latency can make the greatest gamer on the planet feel like a sloth at the controls. Chances are, you already know exactly what latency does to your elite skills. But if you’re new to the game, here’s why latency can be bad news.

So, what is latency exactly? Picture a racquetball bouncing off a wall—how long does that ball take to come back to you?

To answer this question, the ping utility throws a ball of data at a specific destination and records how long the data takes to bounce back. In other words, it pings the server. A low duration is good. A high duration causes delays in your gameplay. Not cool.

For example, you move a mouse and your game reports that movement to a remote server. The server acknowledges the movement and sends a response showing your movements along with all the other player movements. Your game renders the response, but because your latency is high, your movement appears delayed compared to the other players.

Latency is also referred to as ping rate. A low ping rate is good. A high ping rate is bad.

Factors that impact latency

Several factors impact latency. Here are a few:

Physical distance

Games with co-op and competitive multiplayer modes use regional servers because geolocation does matter, even if a server is just a few states away.

So, why does geolocation matter? Because your gaming data moves through multiple “hops” as it travels between you and the server. The more hops your data must traverse, the longer its journey takes—which translates to higher latency. Traffic congestion between you and the remote server can cause a slowdown, too, delaying your controller input.

Connection type

Some internet connections inherently have more latency than others.

For example, satellite internet has the highest latency because wireless transmissions travel up into space and back to reach a remote server. Insulated cable connections have lower latency than uninsulated phone lines, while fiber optic cables have lower latency than both.

Keep in mind that the speed at which your game and the remote server exchange data is different from your download speed. A movie downloads at a slower rate over a 5Mbps DSL connection than it does over a 50Mbps satellite connection.

But when you play games online, the DSL connection is much more responsive than satellite because the gaming data doesn’t launch into space and back. The high latency of the satellite connection causes so much lag that most fast-paced games aren’t even playable online.

How to reduce latency

If high latency causes lag when you play games online, you can take a few steps to help reduce latency and keep your online gameplay responsive and victorious.

Don’t use Wi-Fi if you can

Wi-Fi is convenient but finicky. It adds an extra translation step between your gaming devices and your internet connection, so there’s a bit more delay in your connection. Plus, you have all these other factors that can make Wi-Fi less than ideal for gameplay: radio noise, fluctuating speeds, local network congestion, your distance from the router—sometimes you’ll think the evil Wi-Fi wants you to lose.

To bypass all the wireless chaos, use an Ethernet cable to connect your gaming device to your router. You won’t see the latencies associated with Wi-Fi or the dramatic speed fluctuations, making your connection that much more responsive.

With the Nintendo Switch, we recommend you dock it and use a USB-based Ethernet adapter to connect it to your network. The Nintendo-approved Dual USB Playstand works with the Switch and Switch Lite.

You can use a similar adapter on a notebook or desktop that doesn’t have an Ethernet port.

If you absolutely positively must use Wi-Fi

Connect your wireless device to the 5 GHz band. In fact, use the higher, less used channels (149–161) if you can because everyone in your neighborhood is likely saturating the lower ones (36–48) right this moment. Also, use an 80 MHz channel width too, if possible—don’t bother with a 160 MHz wide channel unless you live far, far away from radar.

Use the 6 GHz band if it’s available to you and your gaming device supports it.

In both cases, be sure to stay close to your Wi-Fi router—within 30 feet or so, depending on the router. Also, keep a clear line of sight to the router with as few obstructions as possible for a better connection.

Ethernet vs. Wi-Fi: Which is best?

We pit wired against wireless in our Ethernet vs. Wi-Fi comparison to see which connection is best for you.

Power cycle network devices

You can power cycle your router and modem to improve their performance. Since very small differences in latency can make a big impact on your gameplay, it’s worth restarting your equipment.

To power cycle, press the Power button or unplug your modem or wireless gateway. After that, wait 30 seconds and then plug it back in. Do the same with a standalone router when your modem comes back online.

Update drivers and firmware

Hardware manufacturers release updates to improve device performance. Updates typically include security fixes, code optimizations, improved device compatibility, and increased stability. You should always keep your firmware and drivers current to prevent issues that can slam the brakes on your internet connection. Be sure to do the following:

  • Update your computer’s drivers and operating system, especially the graphics drivers
  • Update your console’s operating system
  • Update the firmware for all controllers and peripherals
  • Update your router’s firmware

Turn off unnecessary applications and devices

If your connection still struggles while you play games online, try to reduce the amount of traffic on your home network. Make sure someone isn’t streaming 4K video in another room when you’re about to start a new match.

You can also turn off smart devices and pause software and OS updates, so they don’t bog down your network while you play. Just remember to reactivate everything when you’re done.

Use the closest server

Distance is one of the biggest factors in latency. Even if every device on your connection runs at peak efficiency, it still takes time for a signal to travel to a remote location and back.

Games almost always connect you to the nearest server, but if you experience unexplained latency issues, double-check that you’re not connected to the European server if you play in North America. You may need to switch servers if the current one has issues causing lag.

Some gaming routers include tools that can filter out servers with a high ping. For example, NETGEAR’S Nighthawk XR1000 and Nighthawk XR500 routers have the Geo-Filter utility that filters out game servers based on location and ping.

Use port forwarding

Game networks like Xbox Live and the PlayStation Network encourage you to assign “static” IP addresses to your gaming devices and route incoming and outgoing traffic to those addresses. While routers typically assign dynamic addresses to your devices which change over time, a static address never changes.

When you assign a static IP address, you can tell the router to forward data to that address through specific ports. A port is merely a “dock” that handles a specific type of “ship” (data) arriving to and leaving from your router. Gaming networks typically send and receive internet data through specific ports.

To create a static IP address and open ports to that address, you must make the changes in your router or wireless gateway. Port forwarding works with any device—not just gaming consoles.

Use Quality of Service (QoS) controls if available

You may be able to adjust the QoS settings in your router or wireless gateway to allocate more bandwidth to your gaming devices. The router will consider this traffic as “critical” and will prioritize your gaming data over other applications, like Netflix and YouTube. Many routers include a gaming QoS mode you can assign to specific devices on your network.

On some routers, you can only establish one specific bandwidth amount and list the devices that can use that bandwidth. There are no means to prioritize specific traffic, like gaming or streaming.

Avoid peak hours

You may see a slowdown during peak hours when everyone in your home accesses the internet at the same time. Plus, a router is limited to how many wireless devices it can handle simultaneously before slowdowns occur. This heavy load is why we always suggest a router with four or more streams to better handle busy homes.

Peak hours are also associated with cable internet, but it’s no longer the case now that providers like Spectrum and Xfinity use fiber as their network backbone. Rural areas that are still 100% cable may continue to experience peak hour slowdowns, however.

We suggest that you play games later in the evening, or upgrade your router if it has less than four streams.

Check your connections

A slow or bad Ethernet cable can lead to gaming lag woes, whether it’s the cable connecting your router to your modem or fiber ONT, or the one tethering your wired gaming device to the network. Be sure that you have the right Ethernet cable for your plan—you don’t want a CAT 5 cable if your internet connection is faster than 100Mbps.

Also, check your modem’s internet connection, as a loose cable will cause lag-inducing instability.

Upgrade your internet!

If you tried all the steps listed above, and you still experience more lag than you can tolerate, you may need to upgrade to a better internet connection. Enter your zip code below to see what’s available to you.

Other factors to consider for gaming online

Online gameplay pushes the limits of your internet connection more than any other internet activity, but it’s not the only way games put a strain on your connection. We’ll go over more about other things you should consider, like downloads and livestreaming.

Downloads

Many modern games take up a lot of storage space on your computer or console. Game downloads from online distributors like Steam or the Microsoft Store can take a long time. They can also eat through monthly data caps in no time flat.

Game updates can be data hogs too. For example, Bethesda’s Atlantic City—Boardwalk Paradise update for Fallout 76 weighs a hefty 28.3GB when you download it on the Xbox consoles and 36.8GB when you get it through Steam. It’s a smaller update than The Pitt, but it’s still a sizable download.

Latency should still be your number one priority when you shop for internet, but a plan with unlimited data saves you a lot of headaches. Fast download speeds also help with those big new games. After all, extremely long download times on Day One aren’t much fun.

Livestreaming

Your internet needs become a bit more complicated if you stream games to Twitch or YouTube. Streaming has all the normal requirements for a low-latency connection for playing games online, plus the additional upload speed you need to keep a steady bitrate on your livestream.

For more information on what to look for in an internet connection for livestreaming, check out our guide to internet speed for live video game streaming. We also provide a guide on how to stream on Twitch that offers all the information you need.

Game streaming

From the cloud

Game streaming services like Xbox Cloud Gaming have servers dedicated to creating and streaming virtual machines (VMs) to your devices. Games install and play on these VMs in the cloud, eliminating all the hardware bottlenecks that prevent games from running at their highest quality on the devices you own.

In other words, you don’t need a $4,000 desktop or the latest console to play high-end games you can stream from the cloud. Instead, all you need is a browser or an app, depending on the platform, and a good Wi-Fi connection.

But there’s a dark, evil downside. Remote servers render these games and then stream them in HD to 4K resolution across the internet. And because these experiences are interactive and not passive (like Netflix and Hulu), input latency can be problematic.

To play these services without any major issues, you need a good internet connection. Here are the internet speed requirements for the three major game streaming services:

720p1080p2160p
Xbox Cloud Gaming10Mbps (minimum)Not specifiedNot specified
GeForce Now15Mbps25MbpsNot specified
PlayStation Plus5Mbps (minimum)Not specifiedNot specified

From a local device

You can also stream games directly from a game console or gaming PC to a compatible app or web browser, whether you’re on the local network or not. The internet speed requirements are mostly the same, but we highly suggest you connect your console or gaming PC to your network using a wired connection to give you the best performance when playing them remotely.

720p1080p2160p
Xbox Remote Play10Mbps (minimum)Not specifiedNot specified
PlayStation Remote Play15Mbps25MbpsNot specified
Steam Remote Play Anywhere10Mbps (minimum)Not specifiedNot specified

Note that Microsoft suggests an upload speed of at least 4.5Mbps for Xbox Remote Play. An upload speed of 9Mbps or more is ideal.

What about Steam Remote Play Together?

Steam Remote Play Together allows one Steam gamer to run a purchased multiplayer game locally on a PC and then invite four or more Steam friends to play remotely from outside the local network. It’s optimized to stream games to four other players at 1080p and 60 frames per second, so Valve suggests a connection of 10–30Mbps at the least.

A note about online games vs. playing games online

We spend a lot of time discussing games you can play online, which are games that target the single-player experience first and include secondary multiplayer components. These games include Doom Eternal, Pokemon Sapphire and Violet, Far Cry 6, and Halo Infinite. They can experience latency when you play them in co-op and multiplayer modes, especially when more than a few players move across the screen.

Online games, however, can be highly susceptible to latency. These include The Elder Scrolls Online, World of Warcraft, Destiny 2, and similar MMOs. The player count is typically high, which means both the server and the client (your game) must keep track of every player. This can be a huge processing load even if you have the best connection available. Your frame rate may drop, and your input may feel slow.

The bottom line: keep your latency low

You don’t need a lot of speed to play games online. If anything, you need a decent upload speed to livestream your gameplay on Twitch or YouTube.

Your biggest concern is latency. You can have the fastest internet plan on the planet, but a high latency feels like you’re running through mud and makes the game unplayable online. No one wants to sit at the bottom of the scoreboard because mouse clicks and button presses become unresponsive.

We list the best internet providers for gaming based on latency to help you decide what’s best for your online gameplay needs. But you should also consider all your other non-gaming devices and online activities before you select a plan, like downloads, streaming services, at-home office work, schoolwork, and so on.

That said, we recommend one of the best gaming routers—paired with a great internet provider—to balance that load and keep your online gameplay lag-free.

Author -

Peter Christiansen writes about satellite internet, rural connectivity, livestreaming, and parental controls for HighSpeedInternet.com. Peter holds a PhD in communication from the University of Utah and has been working in tech for over 15 years as a computer programmer, game developer, filmmaker, and writer. His writing has been praised by outlets like Wired, Digital Humanities Now, and the New Statesman.

Editor - Cara Haynes

Cara Haynes has been editing and writing in the digital space for seven years, and she's edited all things internet for HighSpeedInternet.com for five years. She graduated with a BA in English and a minor in editing from Brigham Young University. When she's not editing, she makes tech accessible through her freelance writing for brands like Pluralsight. She believes no one should feel lost in internet land and that a good internet connection significantly extends your life span.

Find Providers in Your Area
Back to top